ZXR10 8900 Series Command Reference (Voice and Video Volume)
Purpose
Command Modes
Syntax
Syntax
Description
Instructions
Example
Purpose
Command Modes
Syntax
Defaults
Instructions
Example
16
Confidential and Proprietary Information of ZTE CORPORATION
echo-cancel coverage-time
Use this command to configure the echo cancellation sampling
time length. Restore the default value with no command.
Voice port configuration
echo-cancel coverage-time <coverage-time>
no echo-cancel coverage-time
<coverage-time>
�
The configured coverage-time will not take effect is the echo
cancellation function is cancelled.
�
The modified voice port configuration will take effect in the next
dial-up.
�
It is only applied to ZXR10 GAR and ZXR10 ZSR.
This example describes how to configure the echo cancellation
sampling time length on the voice_3/1 port as 16.
ZXR10(config)#voice-port voice_3/1
ZXR10(config-voice-port)#echo-cancel coverage-time 16
fast-connect
Use this command to enable the call fast connection function. Dis-
able the function with the no command.
Dial-up peer configuration
fast-connect
no fast-connect
This command is disabled by default.
�
This command is only applied to the dial-peer in VOIP type.
�
The modified dial-peer configuration will take effect in the next
dial-up.
�
It is only applied to ZXR10 GAR and ZXR10 ZSR.
This example describes how to configure the dial-peer 100 in VOIP
type to enable the fast connection.
ZXR10(config)#dial-peer voice 100 voip
ZXR10(config-voip100)#fast-connect
Adjusts the echo cancellation sampling time
length (unit: millisecond), in the range of
8~128. Step length is 8 milliseconds, 48
milliseconds by default