Command Mode
All configuration modes
Syntax
show port <portlist> utilization
Parameter Description
Parameter
<portlist>
Guidelines
None
Example
The following example shows the traffic statistics of port 1:
zte(cfg)#show port 1 utilization
PortId: 1
Port rate
Port utilization : input
4.2.19 show port brief
Purpose
This command shows port brief information.
Command Mode
All configuration modes
Syntax
show port <portlist> brief
Parameter Description
Parameter
<portlist>
Guidelines
if one end is auto-negotiation ports and the other end is forced-speed ports, the
interconnection result is as follows:
SJ-20131111172707-003|2013-11-27 (R1.0)
PortName:
: input
Description
Port list
4-57
Chapter 4 Service Configuration
Description
Port list
0Kbps,output:
0%,output:
ZTE Proprietary and Confidential
0Kbps
0%