Zte ZXR10 5250 Series Command Reference Manual page 315

Gigabit-port intelligent switch
Hide thumbs Also See for ZXR10 5250 Series:
Table of Contents

Advertisement

Parameter
permit
deny
<1-28>
any (first)
arp
<sender-ipaddr>
<sip-mask>
any (second)
<target-ipaddr>
<tip-mask>
any (third)
cos <0-7>
<vlan-id>
<vlan-mask>
<source-mac>
<smac-mask>
any (fourth)
<dest-mac>
<dmac-mask>
any (fifth)
SJ-20131111172707-003|2013-11-27 (R1.0)
Description
If the condition matches, access is permitted.
If the condition matches, access is denied.
Binds the global rule to a port. Different devices have different
port number ranges. In the syntax, the 5250-28TC device is used
as an example.
Binds the global rule to all ports.
This rule only matches ARP packet. The non-ARP packet ignores
this rule.
Sender network and host address of ARP packet. It is a 32-bit IP
address expressed in dotted decimal notation.
Source mask used for sources. It is a 32-bit IP address expressed
in dotted decimal notation.
The any keyword is used as the abbreviation of the destination
0.0.0.0 and the destination mask 0.0.0.0.
Destination network and host address of ARP packet. It is a 32-bit
IP address expressed in dotted decimal notation.
Destination mask. It is a 32-bit IP address expressed in dotted
decimal notation.
The any keyword is used as the abbreviation of the destination
0.0.0.0 and the destination mask 0.0.0.0.
This rule is only valid for the cos-specified message. Ignore this
rule for other messages. The range of cos is 0 to 7.
This rule is only valid for messages with the specified VLAN ID.
Ignore this rule for other messages. The rule of VLAN ID is 1
to 4094.
This rule is only valid for messages with the specified VLAN ID.
Ignore this rule for other messages. The rule of VLAN ID is 1
to 4094.
Source MAC address of the transmitted packet.
Source MAC mask.
The any keyword is used as the abbreviation of source MAC
address 00.00.00.00.00.00 and mask 00.00.00.00.00.00.
Destination MAC address of the transmitted packet.
Destination MAC address of the transmitted packet.
The any keyword is used as the abbreviation of destination MAC
address 00.00.00.00.00.00 and mask 00.00.00.00.00.00.
4-257
Chapter 4 Service Configuration
ZTE Proprietary and Confidential

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents