Set Dhcp Snooping Bind-Entry Database Time-Write; Set Dhcp Snooping Bind-Entry Database Write - Zte ZXR10 5250 Series Command Reference Manual

ZXR10 5250 Series Command Reference
Parameter
enable

4.25.35 set dhcp snooping bind-entry database time-write

Purpose
This command writes the DHCP binding table into the Flash memory at scheduled time.
Command Mode
Global configuration mode
Syntax
set dhcp snooping bind-entry database time-write {disable | enable | time <30-65535>}
Parameter Description
Parameter
disable
enable
time
<30-65535>

4.25.36 set dhcp snooping bind-entry database write

Purpose
This command writes the DHCP binding table into the Flash memory.
Command Mode
Global configuration mode
Syntax
set dhcp snooping bind-entry database write
SJ-20131111172707-003|2013-11-27 (R1.0)
Description
Enables the function of reading data from dhcpbase.dat after
the device is started.
Description
Disables the function of scheduled writing of the DHCP binding
table into the Flash memory.
Enables the function of scheduled writing of the DHCP binding
table into the Flash memory.
Sets the scheduled time.
Scheduled Time.
4-452
ZTE Proprietary and Confidential