Set Port Description - Zte ZXR10 5250 Series Command Reference Manual

ZXR10 5250 Series Command Reference
Parameter Description
Parameter
<portlist>
enable
disable
Guidelines
If a port is in full duplex status, the flow control function can be enabled. If a port is in half
duplex status, the back pressure function can be enabled.
Default
The flow control and back pressure functions are disabled.

4.2.8 set port description

Purpose
This command sets the description of a port.
Command Mode
Global configuration mode
Syntax
set port <portlist> description <string>
Parameter Description
Parameter
<portlist>
<string>
Guidelines
A port description contains a maximum of 200 characters.
Example
The following example sets the description of port 1 to aaaa:
zte(cfg)#set port 1 description
SJ-20131111172707-003|2013-11-27 (R1.0)
Description
Port list.
Enables the flow control or back pressure function.
Disables the flow control or back pressure function.
Description
Port list
Port description
aaaa
4-50
ZTE Proprietary and Confidential