ZXR10 5250 Series Command Reference
The following example sets the community name of the event group whose index is 10 to
seu:
zte(cfg-snmp)# set event 10 community seu
The following example sets the owner name of the event group whose index is 10 to tom:
zte(cfg-snmp)#set event 10 owner tom
The following example sets the status of the event group whose index is 10 to invalid:
zte(cfg-snmp)#set event 10 status invalid
5.5.5 set history
Purpose
This command sets a history group.
Command Mode
SNMP configuration mode
Syntax
set history <1-65535>{datasource <1-28>| bucketRequested <1-65535>| owner <name>|
interval <1-3600>| status {valid | underCreation | createRequest | invalid}}
Parameter Description
Parameter
history <1-65535>
<1-28>
bucketRequested <1-65535>
<name>
<1-3600>
valid
underCreation
createRequest
invalid
Examples
The following example sets the data source of the history group whose index is 10 to port
1:
zte(cfg-snmp)#set history 10 datasource 1
SJ-20131111172707-003|2013-11-27 (R1.0)
Description
Index of the history group.
Port number. Different devices have different port number ranges.
In the syntax, the 5250-28TC device is used as an example.
buckerRequest value.
Name of the owner.
Time interval (seconds) of the history group.
The status of the history group is valid.
The status of the history group is underCreation.
The status of the history group is createRequest.
The status of the history group is invalid.
5-34
ZTE Proprietary and Confidential