Guidelines
Real-time alarm information can only be exported to the console terminal.
4.1.47 terminal log module
Purpose
This command enables or disables the function of writing logs for a module.
Command Mode
Global configuration mode
Syntax
terminal log module {all| arp-inspection|dhcp|radius|AAA }{ off | on }
Parameter Description
Parameter
all
arp-inspection
dhcp
radius
AAA
off
on
Guidelines
Record logs in the RAM. To save the logs to the Flash memory, run the toFile/timer
command.
4.1.48 show user
Purpose
This command shows information about the users configured on the switch and the current
login user.
SJ-20131111172707-003|2013-11-27 (R1.0)
Description
Enables or disables the terminal log function for all modules. By default,
the function is enabled.
Enables or disables the terminal log function for the DAI module. By
default, the function is enabled.
Enables or disables the terminal log function for the DHCP module. By
default, the function is enabled.
Enables or disables the terminal log function for the RADIUS module.
By default, the function is enabled.
Enables or disables the terminal log function for the AAA module. By
default, the function is enabled.
Disables the function of writing logs.
Enables the function of writing logs.
4-25
Chapter 4 Service Configuration
ZTE Proprietary and Confidential