Port Configuration; Set Port Enable/Disable - Zte ZXR10 5250 Series Command Reference Manual

Parameter Description
Parameter
<local-file-name>
Example
zte(cfg)#config tffs
zte(cfg-tffs)#check-file version-file /img/zImage
The file check is successful!

4.2 Port Configuration

4.2.1 set port enable/disable

Purpose
This command enables or disables ports.
Command Mode
Global configuration mode
Syntax
set port <portlist>{enable | disable}
Parameter Description
Parameter
<portlist>
enable
disable
Guidelines
Ports are enabled by default, which is not related to the optoelectronic status of combo
ports.
Example
The following example enables ports 1, 5, 6, 7 and 11:
zte(cfg)#set port 1,5-7,11 enable
SJ-20131111172707-003|2013-11-27 (R1.0)
Description
File name with the file path
Description
Port list.
Enables ports.
Disables ports.
4-45
Chapter 4 Service Configuration
ZTE Proprietary and Confidential