Voice Vlan Configuration; Set Vlan Voice-Vlan - Zte ZXR10 5250 Series Command Reference Manual

ZXR10 5250 Series Command Reference
Command Mode
All configuration modes
Syntax
show vlan protocol-mapping
Example
The following example shows protocol VLAN configurations:
zte(cfg)#show vlan protocol-mapping
SessionId
---------
2

4.6 Voice VLAN Configuration

4.6.1 set vlan voice-vlan

Purpose
This command sets the voice VLAN function on a port.
Command Mode
Global configuration mode
Syntax
set vlan voice-vlan port <1-52> ingress-vlan <vlanlist> voice-vlan <1-4094>
Parameter Description
Parameter
<1-52>
<vlanlist>
<1-4094>
Guidelines
Port configurations cannot be modified or covered. If modifications are required, clear the
original configurations first and then re-configure the ports.
SJ-20131111172707-003|2013-11-27 (R1.0)
VlanId EncapType ProtocolType
------ --------- ------------
100 ethernet2 0x1234
Description
Port number. Different devices have different port number ranges.
In the syntax, the 5250-52TC device is used as an example.
User VLAN id list.
Voice VLAN id.
4-86
ZTE Proprietary and Confidential