Clear Ingress-Acl User-Define; Clear Acl Udb Description - Zte ZXR10 5250 Series Command Reference Manual

ZXR10 5250 Series Command Reference
Parameter
<udb-value>
<udb-mask>
Udb15
<udb-value>
<udb-mask>
Guidelines
You can configure multiple user-defined bytes instead of all user-defined bytes. The
configuration cannot be validated unless the start locations of the user-defined bytes are
configured first.
Example
The following example sets the action to deny udb1, the udb1 value to 0x01, and the mask
to 0xff for rule 1:
zte(ingress-user-define-acl)#rule 1 deny udb1 0x01 0xff

4.13.85 clear ingress-acl user-define

Purpose
This command deletes a user-defined ingress ACL instance.
Command Mode
Global configuration mode
Syntax
clear ingress-acl user-define number <801-828>
Parameter Description
Parameter
<801-828>

4.13.86 clear acl udb description

Purpose
This command deletes the description of a user-defined byte.
SJ-20131111172707-003|2013-11-27 (R1.0)
Description
The value that Udb14 must match.
The mask that Udb14 must match.
Fifteenth user-defined byte.
The value that Udb15 must match.
The mask that Udb15 must match.
Mode
Serial number of a user-defined ingress ACL instance
4-298
ZTE Proprietary and Confidential