Pvlan Configuration; Set Vlan Pvlan Session - Zte ZXR10 5250 Series Command Reference Manual

Command Mode
All configuration modes
Syntax
show qos traffic-limit [port <1-28>] protect
Parameters
Parameter
<1-28>

4.15 PVLAN Configuration

4.15.1 set vlan pvlan session

Purpose
This command sets the PVLAN (private VLAN) function.
Command Mode
Global configuration mode
Syntax
set vlan pvlan session <1-4>{promise-port <portlist>| promise-trunk <trunklist>}{isolate-p
ort<portlist>|isolate-trunk<trunklist>}{communi-port <portlist>| communi-trunk <trunkli
st>}
Parameter Description
Parameter
<1-4>
<trunklist>
<portlist>
Guidelines
The promise port can interwork with any type of ports. The isolate port can interwork with
the promise port and ordinary ports, but cannot interwork with the isolate port or communi
port. The communi port can interwork with the promise port, the communi port in the same
session, and ordinary ports, but cannot interwork with the isolate port.
SJ-20131111172707-003|2013-11-27 (R1.0)
Description
Number of a port. Different devices have different port number
ranges. In the syntax, the 5250-28TC device is used as an
example.
Description
PLVAN session number
Trunk port list
Physical port list
4-353
Chapter 4 Service Configuration
ZTE Proprietary and Confidential