Access Service Configuration; Set Port Vlanjump Enable/Disable - Zte ZXR10 5250 Series Command Reference Manual

Gigabit-port intelligent switch

Hide thumbs Also See for ZXR10 5250 Series:

Table of Contents

4.20 Access Service Configuration

This command enables or disables the vlanjump function after the 802.1x authentication

Command Mode

Global configuration mode

set port <portlist> vlanjump {enable [defaultauthvlan <1-4094>]| disable]}

Parameter Description

defaultauthvlan

If the vlanjump function is enabled but the defaultauthvlan parameter is not set, it means

jumping to VLAN 1 by default. If the server distributes vlanjump information, use the VLAN

that is distributed by the server. If the vlanjump function is disabled and the server does

not distribute vlanjump information, no jump occurs.

SJ-20131111172707-003|2013-11-27 (R1.0)

Configures the VLAN that users can access after authentication.

The default is VLAN 1.

Enables the vlanjump function.

Disables the vlanjump function.

Chapter 4 Service Configuration

ZTE Proprietary and Confidential

Show Quick Links

Table of Contents