Set Dhcp Snooping Bind-Entry Mode - Zte ZXR10 5250 Series Command Reference Manual

Syntax
set dhcp snooping bind-entry mac <HH.HH.HH.HH.HH.HH> ip <A.B.C.D> vlan <1-4094>
port <1-28>
Parameter Description
Parameter
<HH.HH.HH.HH.HH.HH>
<A.B.C.D>
<1-4094>
<1-28>
Guidelines
The DHCP snooping function can listen the interaction procedure between the DHCP
server and client to automatically learn dynamic entries. The dynamic entries will disappear
with time passing by or the change of port status. To make the entries stable, add static
entries manually.
Example
The following example adds the static user information binding entry with the MAC address
of 00.d0.d0.00.00.01, IP address of 192.168.0.1, VLAN ID of 1, and port number of 10:
zte(cfg)#set dhcp snooping bind-entry mac 00.d0.d0.00.00.01
ip 192.168.0.1 vlan 1 port 10

4.25.7 set dhcp snooping bind-entry mode

Purpose
This command sets the binding mode of ports' dynamic user information binding entries.
Command Mode
Global configuration mode
Syntax
set dhcp snooping bind-entry mode port <portlist>{hold | drop}
Parameters
Parameter
<portlist>
SJ-20131111172707-003|2013-11-27 (R1.0)
Description
MAC address of the DHCP client device.
IP address that the DHCP server allocates to the client.
VLAN ID that the client uses for communication.
Port number that the client uses for communication. Different
devices have different port number ranges. In the syntax, the
5250-28TC device is used as an example.
Description
Port list.
4-435
Chapter 4 Service Configuration
ZTE Proprietary and Confidential