Checking The Equipment System Time - Zte ZXR10 5900E Series Routine Maintenance

ZXR10 5900E Series Routine Maintenance
Reference Standards
1. Run the show running-config command to check the configuration file.
In normal situations, the configuration should be consistent with that the users require.
If there is new configuration, it is necessary to run the write command to save the
configuration.
2. Run the show nvram-info command to check the position where the device boots from
next time.
In normal situations, the position should be local.
For example:
ZXR10#show nvram
imgfile-location
... ...
3. Run the dir command to check the rest capacity of the hard disk.
In normal situations, it is necessary to delete some useless version files and exception
files if the rest capacity is not enough.
For example:
ZXR10#dir
Directory of MP-0/1/0: /flash
356352

4.3 Checking the Equipment System Time

Purpose
This topic describes how to check the equipment system time to ensure that the system
time is the same as the standard time.
Step
Check the equipment system time.
Reference Standard
Run the show clock command to check the equipment system time.
In normal situations, the system time should be the same as the standard time (the
difference should be less than 5 minutes).
If the time is not the same, it is necessary to execute the clock set command to modify the
time, or set the equipment to obtain the time through an NTP server.
For example:
ZXR10#show clock
116:35:32 UTC Thu Apr 30 2012
SJ-20150114102049-013|2015-01-15 (R1.0)
: local
KB total (222684 KB free)
4-2
ZTE Proprietary and Confidential