Show Running-Config; Show Start-Config - Zte ZXR10 5250 Series Command Reference Manual

4.1.50 show running-config

Purpose
This command shows the non-default configurations of the system.
Command Mode
All configuration modes
Syntax
show running-config [{include | begin}<string>]
Parameter Description
Parameter
include
begin
<string>
Guidelines
This command without any parameters can show all the non-default configurations.
Example
The following example shows configurations of the system:
zte(cfg)#show running-config

4.1.51 show start-config

Purpose
This command shows all the non-default configurations of the system when the write
command is run the last time.
Command Mode
All configuration modes
Syntax
show start-config
SJ-20131111172707-003|2013-11-27 (R1.0)
Description
Only shows the command lines that match the character string
defined by the <string> parameter.
Shows the command lines that begin with the character string
defined by the <string> parameter.
Defines a character string.
4-27
Chapter 4 Service Configuration
ZTE Proprietary and Confidential