Show Dhcp Relay Binding; Show Dhcp Relay Option82 Port - Zte ZXR10 5250 Series Command Reference Manual

Syntax
show dhcp vclass-id
Example
The following example shows DHCP relay vclass-id configurations:
zte(cfg)#show dhcp relay vclass-id
Index Vclass_ID
----- -------------------------------------------------- ---------------
1 ztelsj

4.40.13 show dhcp relay binding

Purpose
This command shows DHCP relay binding table information.
Command Mode
All configuration modes
Syntax
show dhcp relay binding [port <1-28>| trunk <1-15>]
Parameter Description
Parameter
port <1-28>
trunk <1-15>
Guidelines
If no parameter is specified in the command, the global status and all table entry information
are displayed.

4.40.14 show dhcp relay option82 port

Purpose
This command shows DHCP relay option82 configurations on a port.
Command Mode
All configuration modes
SJ-20131111172707-003|2013-11-27 (R1.0)
Description
Port number corresponding to a relay table entry.
Trunk number corresponding to a relay table entry.
4-559
Chapter 4 Service Configuration
IpAddress
1.1.1.1
ZTE Proprietary and Confidential