Show Cable-Diag; Set Port Eee - Zte ZXR10 5250 Series Command Reference Manual

ZXR10 5250 Series Command Reference

4.2.23 show cable-diag

Purpose
This command shows the numbers, up/down status, and virtual line detection results of all
ports.
Command Mode
All configuration modes
Syntax
show cable-diag
Guidelines
If a port does not support VCT, N/A is displayed. For an FE port, two pairs (MDI[0] and
MDI[1]) of detection results are displayed. For a GE port, four pairs (MDI[0] and MDI[1])
of detection results are displayed.

4.2.24 set port eee

Purpose
This command enables or disables the port energy-saving function.
Command Mode
All configuration modes
Syntax
set port <portlist> eee {enable | disable}
Parameter Description
Parameter
[<portlist>]
enable
disable
Default
The port energy-saving function is disabled.
SJ-20131111172707-003|2013-11-27 (R1.0)
Description
Port list.
Enables the port energy-saving function.
Disables the port energy-saving function.
4-60
ZTE Proprietary and Confidential