Iptv Channel Mvlan Groupip Name - Zte ZXR10 5250 Series Command Reference Manual

4.11.3 iptv channel mvlan groupip name

Purpose
This command adds a channel (multicast group) to the specified VLAN, names the
channel, and allocates an ID.
Command Mode
NAS configuration mode
Syntax
iptv channel mvlan <1-4094> groupip <A.B.C.D>[name <channel-name>[id <0-1031>]]
Parameters
Parameter
<1-4094>
<A.B.C.D>
name <channel-name>
id <0-1031>
Guidelines
If channel-name is not selected, the channel name and channel ID use the default values.
The channel ID is calculated internally. If the value is 5, the corresponding channel
name is CHNAME5. To configure the channel name when creating a channel, select the
channel-name parameter. The channel ID is optional but must be an unused one. The
channel name cannot be chgnameN, where N ranges from 0 to 1031.
Example
The following example creates the channel 224.0.1.1 in VLAN 1 and sets the channel
name of 224.0.1.3 to cctv and channel number to 100:
zte(cfg-nas)#iptv channel mvlan 1 groupip 224.0.1.1
zte(cfg-nas)#iptv channel mvlan 1 groupip 224.0.1.3 name cctv id 100
zte(cfg-nas)#show iptv channel
MaxChannelNum:1032
CurChannelNum:2
HisChannelNum:2
Id
------
0
100
SJ-20131111172707-003|2013-11-27 (R1.0)
Description
VLAN ID to which a channel is to be added.
IP address of the channel (group).
Channel name, which contains a maximum of 32 characters.
Channel ID.
Name
--------------------------------
CHNAME0
CCTV
Chapter 4 Service Configuration
GroupIp
---------------
224.0.1.1
224.0.1.3
4-155
ZTE Proprietary and Confidential
MVlan
------
1
1