Set Igmp Snooping Timeout Route/Host - Zte ZXR10 5250 Series Command Reference Manual

ZXR10 5250 Series Command Reference
Guidelines
When the private group function is enabled and the private group receives leave
messages, all groups of the device will be deleted.
Default
The private group function is disabled.
Example
The following example adds the private group 10.0.0.23 and enables the private group
function:
zte(cfg)#set igmp snooping private-group 10.0.0.23
zte(cfg)#set igmp snooping private-group enable

4.10.11 set igmp snooping timeout route/host

Purpose
This command sets the aging time of router/host.
Command Mode
Global configuration mode
Syntax
set igmp snooping timeout {host | router}<time>
Parameter Description
Parameter
host
router
<time>
Guidelines
If timeout occurs, delete the router and host from the multicast group.
Default
The default aging time is 2600, that is, 260 seconds.
SJ-20131111172707-003|2013-11-27 (R1.0)
Description
Sets time-out of hosts.
Sets time-out of routers.
Aging time. The value is 0 or ranges from 100 through
2147483647, unit: 100 milliseconds. The value 0 means that
hosts or routers will not be aged out.
4-138
ZTE Proprietary and Confidential