Ingress-Acl Hybrid Rule Type-Ipv6-Udp - Zte ZXR10 5250 Series Command Reference Manual

Parameter
<sipv6-mask>
any (first)
<destination-ipv6addr>
<dipv6-mask>
any (second)
dest-port <0-65535>
<dport-mask>
<vlan-id>
Guidelines
The IPv6-TCP
destination-specified IPv6, any destination IPv6, TCP source port numbers, TCP
destination port numbers, and VLAN fields.

4.13.34 ingress-acl hybrid rule type-ipv6-udp

Purpose
This command sets the rule that the hybrid ingress ACL matches the IPv6-UDP packet.
Command Mode
Hybrid ingress ACL configuration mode
Syntax
rule <1-500>{permit | deny} ipv6 udp {<source-ipv6addr><sipv6-mask>| any}[source-port <0
-65535><sport-mask>]{<destination-ipv6addr><dipv6-mask>| any}[dest-port <0-65535><dpor
t-mask>][<vlan-id>]
SJ-20131111172707-003|2013-11-27 (R1.0)
Description
Source mask and used for source. It is expressed by an integer.
The range is 1 to 128.
Matches all source IPv6 addresses, source and source mask are
all 0s.
The destination network or host address of the transmitted IPv6
packet. The standard IPv6 address format is used, such as
abcd:EF12::123 4
Destination mask. It is used for destination and represented by
one integer. The value range is 1 to 128.
Matches all destination IPv6 addresses. The destination and
destination mask are all 0s.
TCP destination port number of the transmitted packet
The dest-port parameter resolve some known port number. Also
the port number and mask can be entered.
Destination port mask.
This rule is only valid for messages with the specified VLAN ID.
Ignore this rule for other messages. The rule of VLAN ID is 1
to 4094.
rule can match
4-245
Chapter 4 Service Configuration
source-specified IPv6,
ZTE Proprietary and Confidential
any source IPv6,