Show Snmp Community/Engineid/Group/Host/Trap/User/View - Zte ZXR10 5250 Series Command Reference Manual

adminPasswordNoChangeTrap: disabled
dismanPingNotifications
crcLimit
macNotificationTrap
macStationmoveTrap
All snmp host information:
HostIpAddress
---------------- ------------ ------- ------ -------------
10.40.89.78
All snmp community information:
CommunityName
---------------------------------- ------- --------------- ---
beijing
All snmp view information:
ViewName
------------ -------- ------------------------
test
zteView

5.4.26 show snmp community/engineID/group/host/trap/user/view

Purpose
This command shows the information of SNMP V1, V2c, and V3.
Command Mode
All configuration modes
Syntax
show snmp {community | engineID | group | host | trap | user | view}
Parameter Description
Parameter
community
engineID
group
host
trap
user
view
SJ-20131111172707-003|2013-11-27 (R1.0)
: disabled
: disabled
: disabled
: disabled
Comm/User Version Type
beijing Ver.2c
Level
private
Exc/Inc MibFamily
Include 1.3.6.1
Include 1.3.6.1
Description
Shows community configurations.
Shows the engine ID.
Shows group configurations.
Shows host configurations.
Shows trap configurations.
Shows V3 user configurations.
Shows view configurations.
5-27
Chapter 5 Management Configuration
SecurityLevel
Trap -
ViewName
ZTE Proprietary and Confidential
Acl
-