Set Dhcp Relay Server Retry; Set Dhcp Relay Vclass-Id Server - Zte ZXR10 5250 Series Command Reference Manual

ZXR10 5250 Series Command Reference
Syntax
set dhcp relay server mode {ipport | vclass-id}
Parameter Description
Parameter
ipport
vclass-id

4.40.7 set dhcp relay server retry

Purpose
This command sets the number of retry times of sending packets to the server.
Command Mode
Global configuration mode
Syntax
set dhcp relay server retry <5-1000>
Parameter Description
Parameter
<5-1000>

4.40.8 set dhcp relay vclass-id server

Purpose
This command sets the class-id domain of the serve and the corresponding server IP
address.
Command Mode
Global configuration mode
Syntax
set dhcp relay vclass-id {characters <string>| hex-numbers < hex-string>} server <A.B.C.
D>
SJ-20131111172707-003|2013-11-27 (R1.0)
Description
The address of the DHCP server is obtained from the command
line ipport.
The address of the DHCP server is obtained from the command
line vclass-id.
Description
Number of retry times. The default value is 10.
4-556
ZTE Proprietary and Confidential