Show Dhcp Relay Option82 Device; Set Pport Dhcp Relay - Zte ZXR10 5250 Series Command Reference Manual

ZXR10 5250 Series Command Reference
Syntax
show dhcp relay option82 port<1-28>
Parameter Description
Parameter
<1-28>
Example
The following example shows DHCP option82 configurations on port 1:
zte(cfg)#show dhcp relay option82 port 1
DHCP option82 sub-option information on port 1:
Circuit-ID: Disabled
Remote-ID: Enabled
Format: Cisco
DHCP option82 mode information on port 1: Default

4.40.15 show dhcp relay option82 device

Purpose
This command shows device information, including ANI and remote-ID.
Command Mode
All configuration modes
Syntax
show dhcp relay option82 device
Example
The following example shows device information:
zte(cfg)#show dhcp relay option82 device
DHCP relay option82 sub-option information on device:
Access-Node-Identifier: -
Remote-ID: Cisco

4.40.16 set pport dhcp relay

Purpose
This command sets DHCP relay information on an IP port.
SJ-20131111172707-003|2013-11-27 (R1.0)
Description
Port number. Different devices have different port number ranges.
In the syntax, the 5250-28TC device is used as an example.
4-560
ZTE Proprietary and Confidential