Set Qos Traffic-Limit Mode - Zte ZXR10 5250 Series Command Reference Manual

Default
All templates are all 0s, that is, SP scheduling policy.
Example
The following example configures template 1 in which queues 1 and 2 are scheduled in
accordance with 1:2, queues 4 and 5 are scheduled in accordance with 2:4, and other
queues are scheduled in accordance with SP:
zte(cfg)#set qos queue-schedule session 1 0 10 20 0 20 40 0 0
zte(cfg)#show qos queue-schedule session 1
Egress Queue Schedule Profile Table:
Session Bind
queue number
queue weight

4.14.13 set qos traffic-limit mode

Purpose
This command sets the global ingress rate limit mode.
Command Mode
Global configuration mode
Syntax
set qos traffic-limit mode {byte| packet}
Parameter Description
Parameter
byte
packet
Example
The following example sets the ingress rate limit mode to byte-based in global configuration
mode:
zte(cfg)#set qos traffic-limit mode byte
SJ-20131111172707-003|2013-11-27 (R1.0)
: Profile-1 Schedule Mode : byte mode
: 0 1 2 3 4
: SP 10 20 SP 20
Description
Sets the global ingress rate limit mode to byte-based mode. The
unit of data-rate is Kbps.
Sets the global ingress rate limit mode to packet-based mode.
The unit of data-rate is Kpps.
4-311
Chapter 4 Service Configuration
5 6 7
40 SP SP
ZTE Proprietary and Confidential