Set Dhcp Snooping Vlan Quota - Zte ZXR10 5250 Series Command Reference Manual

Example
The following example sets the quota of the binding table supported by DHCP snooping
to 100:
zte(cfg)#set dhcp snooping quota 100
zte(cfg)#show dhcp snooping quota
DHCP snooping global quota
Quota
-----
100

4.25.41 set dhcp snooping vlan quota

Purpose
This command sets the quota of the binding table supported by DHCP snooping based on
a VLAN.
Command Mode
Global configuration mode
Syntax
set dhcp snooping vlan <vlanlist> quota <0-8191>
Parameter Description
Parameter
<vlanlist>
<0-8191>
Default
By default, the quota is not limited.
Example
The following example sets the quota of the binding table supported by DHCP snooping
to 100 in VLAN 1:
zte(cfg)# set dhcp snooping vlan 1 quota 100
zte(cfg)#show dhcp snooping quota
DHCP snooping global quota
Quota
-----
100
SJ-20131111172707-003|2013-11-27 (R1.0)
VlanId PortId
------ ------
1
Description
VLAN list
Quota of the binding table
VlanId PortId
------ ------
1
Chapter 4 Service Configuration
: 100
: no limit
4-455
ZTE Proprietary and Confidential