Set Port Protocol-Vlan Enable/Disable - Zte ZXR10 5250 Series Command Reference Manual

ZXR10 5250 Series Command Reference
Syntax
set vlan <vlanlist> delete trunk <trunklist>
Parameter Description
Parameter
<vlanlist>
<trunklist>
Example
The following example deletes trunk 1 from VLANs 1, 5, 6, 7 and 12:
zte(cfg)#set vlan 1,5-7,12 delete trunk 1

4.5.6 set port protocol-vlan enable/disable

Purpose
This command enables or disables the protocol VLAN function on ports.
Command Mode
Global configuration mode
Syntax
set port <portlist> protocol-vlan {enable | disable}
Parameter Description
Parameter
<portlist>
enable
disable
Default
The protocol VLAN function is disabled.
Example
The following example enables the protocol VLAN function on port 10:
zte(cfg)#set port 10 protocol-vlan enable
SJ-20131111172707-003|2013-11-27 (R1.0)
Description
VLAN list
Trunk list
Description
Port list.
Enables the protocol VLAN function.
Disables the protocol VLAN function.
4-82
ZTE Proprietary and Confidential