Show Dhcp Vlan; Set Dhcp Relay Vlan - Zte ZXR10 5250 Series Command Reference Manual

Parameter Description
Parameter
<A.B.C.D>

4.40.20 show dhcp vlan

Purpose
This command displays the VLANs for which the DHCP relay function is enabled.
Command Mode
All modes
Syntax
show dhcp relay vlan
Example
The following example displays the VLANs for which the DHCP relay function is enabled:
zte(cfg)#show dhcp relay vlan
DHCP relay enabled vlan: 10

4.40.21 set dhcp relay vlan

Purpose
This command enables or disables the DHCP relay function in a VLAN.
Command Mode
Global configuration mode
Syntax
set dhcp relay vlan <vlanlist>{enable|disable}
Parameter Description
Parameter
<vlanlist>
enable
disable
SJ-20131111172707-003|2013-11-27 (R1.0)
Description
IP address of the DHCP server
Description
Vlan ID.
Enables the DHCP relay function.
Disables the DHCP relay function.
4-563
Chapter 4 Service Configuration
ZTE Proprietary and Confidential