Clear Stp Name; Show Stp - Zte ZXR10 5250 Series Command Reference Manual

Parameter
port <1-52>
trunk <1-15>

4.12.28 clear stp name

Purpose
This command deletes the MSTP domain name.
Command Mode
Global configuration mode
Syntax
clear stp name

4.12.29 show stp

Purpose
This command shows the STP global configuration.
Command Mode
All configuration modes
Syntax
show stp
Example
The following example shows the STP global configuration:
zte(cfg)#show stp
The spanning_tree protocol is enabled!
The STP ForceVersion is MSTP !
Revision: 0
Name: zte-test
Bpdu interval: 1000
Cisco key:
Cisco digest:
Huawei key:
SJ-20131111172707-003|2013-11-27 (R1.0)
Description
Port number. Different devices have different port number ranges.
In the syntax, the 5250-52TC device is used as an example.
Trunk ID.
0x13ac06a62e47fd51f95d2ba243cd0346
0x00000000000000000000000000000000
0x13ac06a62e47fd51f95d2ba243cd0346
4-211
Chapter 4 Service Configuration
ZTE Proprietary and Confidential