Set Sflow Ingress/Egress Enable/Disable - Zte ZXR10 5250 Series Command Reference Manual

ZXR10 5250 Series Command Reference
Syntax
set sflow version <number>
Parameter Description
Parameter
<number>
Guidelines
Most network management software supports SFLOW V5 only.
configuring V4.
Default
The default format version is V5.

5.7.4 set sflow ingress/egress enable/disable

Purpose
This command enables or disables the ingress/egress SFLOW function.
Command Mode
Global configuration mode
Syntax
set sflow {ingress | egress}{enable | disable}
Parameter Description
Parameter
ingress
egress
enable
disable
Default
The ingress/egress SFLOW function is disabled.
Example
The following example enables the ingress SFLOW function and disables the egress
SFLOW function:
SJ-20131111172707-003|2013-11-27 (R1.0)
Description
Format version of the SFLOW sampling message, including V4
and V5.
Description
Configures the ingress SFLOW.
Configures the egress SFLOW.
Enables the SFLOW function.
Disables the SFLOW function.
5-62
Use caution when
ZTE Proprietary and Confidential