Set Mld Snp Last-Member-Query - Zte ZXR10 5250 Series Command Reference Manual

ZXR10 5250 Series Command Reference
Parameter Description
Parameter
<1000-25000>
Guidelines
When the switch receives query messages, it waits for a period and then sends report
messages, which avoids instant attacks to the router due to the centralized replies.
Defaults
The waiting time is 10000 milliseconds.
Example
The following example sets the waiting time that the switch sends report messages to 15
seconds:
zte(cfg)#set mld snooping query-response-interval 15000

4.34.10 set mld snp last-member-query

Purpose
This command sets the waiting time for replies after the switch sends query messages
when the last member leaves.
Command Mode
Global configuration mode
Syntax
set mld snooping last-member-query <1-25>
Parameter Description
Parameter
<1-25>
Guidelines
If no response when time is out, delete the last member.
Default
The waiting time for replies is one second.
SJ-20131111172707-003|2013-11-27 (R1.0)
Description
Waiting time, in the unit of milliseconds.
Description
Waiting time (seconds) for replies
4-516
ZTE Proprietary and Confidential