Show Igmp Snooping V3 Port/Trunk; Show Igmp Filter Report - Zte ZXR10 5250 Series Command Reference Manual

ZXR10 5250 Series Command Reference
PortId: 4
Maximal group number: 100
Current group number: 0
Max-groups action
PortId: 5
Maximal group number: 100
Current group number: 0
Max-groups action
....../*Omitted*/......

4.10.29 show igmp snooping v3 port/trunk

Purpose
This command shows the multicast group information of v3 snooped on the specified
port/trunk.
Command Mode
All configuration modes
Syntax
show igmp snooping v3 {port <1-28>| trunk <1-15>}
Parameter Description
Parameter
<1-28>
<1-15>
Example
The following example shows multicast group information of v3 snooped on port 1:
zte(cfg)#show igmp snooping v3 port 1
No source specific multicast address records!
The max group records num : 0
Total source records count: 0

4.10.30 show igmp filter report

Purpose
This command shows the configuration of multicast filtering.
SJ-20131111172707-003|2013-11-27 (R1.0)
: default
: default
Description
Port number. Different devices have different port number ranges.
In the syntax, the 5250-28TC device is used as an example.
Trunk ID.
4-150
ZTE Proprietary and Confidential