Set Mld Snp Vlan Add Group - Zte ZXR10 5250 Series Command Reference Manual

ZXR10 5250 Series Command Reference
Parameter
<vlanlist>
Default
The maximum number of multicast groups is 256.
Example
The following example sets the maximum number of multicast groups of VLANs 1 to 10 to
100:
zte(cfg)#set mld snooping add maxnum 100 vlan 1-10

4.34.4 set mld snp vlan add group

Purpose
This command adds a static group into the specified VLAN and adds ports to the statistic
group.
Command Mode
Global configuration mode
Syntax
set mld snooping vlan <1-4094>add group <ipv6-address> port <portlist>
Parameter Description
Parameter
<1-4094>
add
<ipv6-address>
<portlist>
Example
The following example adds the statistic multicast group ff1e::22 to VLAN 1 and adds ports
1 to 10 to the static group:
zte(cfg)#set mld sn vlan 1 add group ff1e::11 port 1-10
SJ-20131111172707-003|2013-11-27 (R1.0)
Description
VLAN list.
Description
ID of the VLAN into/from which the static group is added/deleted.
Adds a static group.
IPv6 address.
List of ports added to/deleted from the group.
4-512
ZTE Proprietary and Confidential