Set Banner Filename; Set Banner Endwith - Zte ZXR10 5250 Series Command Reference Manual

ZXR10 5250 Series Command Reference
Example
The following example clears configuration and restarts the system:
zte(cfg)#clear running-config

4.1.74 set banner filename

Purpose
This command configures the banner displayed on the start screen, and saves the banner
in a file. The banner can contain spaces.
Command Mode
Global configuration mode
Syntax
set banner filename <string>
Parameter Description
Parameter
<string>
Example
zte(cfg)#set banner filename hide.txt

4.1.75 set banner endwith

Purpose
This command sets the end identifier for entering the banner displayed on the start screen.
When the end identifier is entered, you complete entering the banner to be displayed.
Command Mode
Global configuration mode
Syntax
set banner endwith <string>
SJ-20131111172707-003|2013-11-27 (R1.0)
Description
Name of the file used for customizing the banner displayed on the
start screen, length: 1–32 characters.
The file path is /cfg/. If the specified file exists, the banner in the
file (it must be a text file) is used after the system is restarted. If
the specified file does not exist, you can write the banner and
then save the banner in a file.
4-38
ZTE Proprietary and Confidential