Mr-J3-_B_ And Mr-J3W-_B Parameter Diversion Procedure - Mitsubishi Electric MELSERVO-J3 Series Manual

Part 5: Common Reference Material

2.3 MR-J3-_B_ and MR-J3W-_B Parameter Diversion Procedure

The parameter converter functions of GX Works2 and MT Developer2 convert the servo parameters of MR-
J3-_B_ and MR-J3W-_B to those of MR-J4-_B_ MR-J4W2-_B and when the controller is changed.
(GX Works2: 1.84N or later, MT Developer2: 1.41T or later)
(Target model)
• Positioning module QD75MH to Simple Motion module QD77MS/LD77MS
• Motion controller Q17nHCPU/Q17nDCPU/Q170MCPU to Q17nDSCPU/Q170MSCPU(-S1)
GX Configurator-QP
SW3RNC-GSV
SW6RNC-GSV
POINT
Parameters common to MR-J3-_B_, MR-J3W-_B, MR-J4-_B_ and MR-J4W2-_B
are the conversion targets.
The initial value of MR-J4-_B_ and MR-J4W2-_B is set for additional parameters
of MR-J4-_B_ and MR-J4W2-_B.
Change controller
(parameter converter)
Project file
Change MR-J3-_B_/MR-J3W-_B to MR-J4-_B_/MR-J4W2-_B
GX Works2 (Simple Motion module setting tool)
5 - 46
MT Developer2