Changing Qd75Mh To Qd77Ms/Ld77Ms - Mitsubishi Electric MELSERVO-J3 Series Manual

Part 5: Common Reference Material

2.3.1 Changing QD75MH to QD77MS/LD77MS

(1) Start GX Works2 and create a project.
(2) Right-click [Intelligent Function Module] in the Navigation window and select [New Module] to add the
simple motion module QD77MS/LD77MS.
(3) Double-click [Simple Motion Module Setting] of the added simple motion module to start the simple
motion module setting tool.
(4) Read the GX Configurator-QP data.
Click [Project] - [Import GX Configurator-QP Data] from the menu to display the screen for reading GX
Configurator-QP data. Specify and read QD75MH data.
When using QD75MH data made on GX Works2, save the QD75 data as GX Configurator-QP data on
GX Works2 and perform the above operation.
5 - 47