Mr-J4 Series Power Factor Improving Ac Reactors (400 V Class) - Mitsubishi Electric MELSERVO-J3 Series Manual

Part 7: Review on Replacement of Optional Peripheral Equipment

7.6 MR-J4 series Power factor improving AC reactors (400 V class)

The following shows the advantages of using power factor improving AC reactor.
It improves the power factor by increasing the form factor of the servo amplifier's input current.
It decreases the power supply capacity.
The input power factor is improved to be about 80%.
When using power factor improving reactors for two servo amplifiers or more, be sure to connect a power
factor improving reactor to each servo amplifier. If using only one power factor improving reactor, enough
improvement effect of phase factor cannot be obtained unless all servo amplifiers are operated.
W1
W ± 0.5
Fig. 7.15
150
125
W1
W ± 0.5
Fig. 7.16
Note Use this for grounding.
4-d mounting hole (Note)
(φ5 groove)
R X S Y T Z
D or less
D2
D1
R X S Y T Z
4-d mounting hole (Note)
(φ6 groove)
D or less
D2
D1
7 - 57
MCCB
3-phase
380 V AC to
480 V AC
180
W1
W ± 0.5
Fig. 7.17
Servo amplifier
3-phase
400 V class
FR-HAL-H
MC
R X
L1
S Y
L2
T Z
L3
R X S Y T Z
4-d mounting hole (Note)
(φ8 groove)
D or less
D2
D1