Mitsubishi Electric MELSERVO-J3 Series Manual page 315

Part 5: Common Reference Material
2) Response mode selection
Select a response mode from 3 modes in the one-touch tuning window of MR Configurator2.
Refer to the following table for selecting a response mode.
Low mode
Response mode
High mode
Basic mode
Low mode
Table 5.7 Guideline for response mode
Response mode
Basic mode High mode
5 - 130
Table 5.6 Response mode explanations
This mode is for high rigid system.
This mode is for standard system.
This mode is for low rigid system.
Response
Guideline of corresponding machine
Low response
Precision working
High response
Explanation
Machine characteristic
Arm robot
General machine
tool conveyor
machine
Inserter
Mounter
Bonder