Safety Considerations - Newport MM4006 User Manual

MM4006
Section 1
Introduction
1.1

Safety Considerations

( % ,
N e v v p o r t . 1
The following general safety precautions must be observed during all phas-
es of operation of this equipment. Failure to comply with these precautions
or with specific warnings elsewhere in this manual violates safety stan-
dards of design, manufacture and intended use of this equipment.
Disconnect o r do not plug in the power cord in the following circum-
stances:
• I f the power cord or any other attached cables are frayed or damaged in
any way.
• I f the power plug or receptacle is damaged in any way.
• I f the unit is exposed to rain, excessive moisture or liquids are spilled on it.
• I f the unit has been dropped or the case is damaged.
• I f you suspect service or repair is required.
• Whenever you clean the case.
To protect the equipment from damage and avoid hazardous situations, fol-
low these recommendations:
• D o not open the equipment. There are no user serviceable or adjustable
parts inside.
• D o not make any modifications or parts substitutions to the equipment.
• R e t u r n the equipment to Newport for any service and repair needs.
• D o not touch, directly or with other objects, live circuits inside the unit.
• D o not operate the unit in an explosive atmosphere.
• K e e p all air vents free of dirt and dust.
• D o not block air vents with paper or other objects.
• K e e p all liquids away from unit.
• D o not expose equipment to excessive moisture (>85% humidity).
. 3
8-Axis Motion Controller/Driver
M 1 0 1 8 1 E 0 1 0 2 0 t W O 3