Setting The Ethernet Communication - Mitsubishi Electric M700VS Series Setup Manual

MITSUBISHI CNC
5 PLC Program Writing
In this manual, PLC program writing is executed by connecting a personal computer, which has GX Developer installed,
to the control unit. You can also save the PLC program in a CF card and write the data to NC using the external file
operations on PLC onboard. (M700V Series allows using a USB memory.) Refer to the PLC programming Manual for
details.

5.1 Setting the Ethernet Communication

(1) Click "Start" on the personal computer. Right-click on "My network" and select "Property".
(2) Right-click on "Local Area Connection" in My network window, and select "Properties".
(3) Click "Internet Protocol(TCP/IP)" on the "General" tab, and then click "Properties".
(4) Take a note of the displayed IP address and subnet mask.
58