5.2
General-purpose Ethernet Communication
Configuration
For details on general-purpose Ethernet communication configuration, refer to MELSEC iQ-F FX5 User's Manual
(Ethernet Communication).
5.3
Available Software Packages
To configure the settings of the FX5-ENET/IP, the GX Works3 and EtherNet/IP Configuration Tool for FX5-ENET/IP are
required.
Software
GX Works3
EtherNet/IP Configuration Tool for FX5-ENET/IP
Profile of the FX5-ENET/IP
Profile is the data in which the information (such as models) of the connected devices is stored.
Register the profile of the FX5-ENET/IP in GX Works3 at the installation of EtherNet/IP Configuration Tool for FX5-ENET/IP.
For details on operating procedure, refer to the following.
GX Works3 Operating Manual
5 SYSTEM CONFIGURATION
44
5.2 General-purpose Ethernet Communication Configuration
Supported version
Ver.1.050C or later
Ver.1.00A or later