Checking Inputs/Outputs And Alarms - Mitsubishi Electric M700VS Series Setup Manual

MITSUBISHI CNC
6 Confirming the Basic Operation

6.1 Checking Inputs/Outputs and Alarms

(1) Checking the input signals
(a) Select [I/F dia] on the Diagn screen.
(b) Confirm that signals turn ON/OFF properly on the IF Diagnosis screen.
(2) Checking the alarm display
(a) Select [Alarm message] on the Diagn screen.
(b) Check any other alarm than "Emergency stop EXIN" displayed on the Alarm screen.
70