Mitsubishi Electric M700VS Series Setup Manual page 83

MITSUBISHI CNC
5 PLC Program Writing
(3) Select [Remote operation] again. Select "PAUSE" from the pull-down menu in the "Operation" field and click
"Execute". (Executing "PAUSE" starts the writing to NC ROM.)
(4) The message "Completed." appears when the writing to ROM is completed.
(Note) The program has been written to ROM although the on-board screen still shows the message "ROM-
Write incomplete".
The message will disappear when the screen has been changed.
(Note) You can also save the PLC program in a CF card and write the data to NC using the external file operations on
PLC onboard. Refer to the PLC programming Manual for details.
66