Mitsubishi Electric M700VS Series Setup Manual page 660

Date of
Manual No.
revision
Nov. 2008 IB(NA)1500906-A First edition created.
Jan. 2009 IB(NA)1500906-B Mistakes were corrected.
May. 2010 IB(NA)1500906-C
Jun. 2010 IB(NA)1500906-D
Nov. 2011 IB(NA)1500906-E
Revision History
- Added "2.1.2 Setting up without Connecting to the Motor/ Drive unit".
- Changed the structure of Chapter 6.2.3 according to the changes made to the MS
Configurator.
Old: 6.2.3 First Measure Against Vibration
New: 6.2.3 Servo Simplified Adjustment
6.2.3.1 First Measure Against Vibration
6.2.3.2 MS Configurator
- Changed the structure of Chapter 8 as explanation of H/W OT was added.
Old: 8 Setting the Stored Stroke Limit
8.1 Outline
8.2 Detailed Explanation
New: 8 Setting the Tool Entry Prohibited Range
8.1 Stroke End (H/W OT)
8.2 Stored stroke limit (S/W OT)
8.2.1 Outline
8.2.2 Detailed Explanation
- Corrected Alarms/Parameters to support the system software G1 version.
- Mistakes were corrected.
- Mistakes were corrected.
- Added "Handling of our product".
- Updated the contents of "6.2.3.2 MS Coinfigurator".
- Reviewed "7. Setting the Position Detection System".
- Added "12.1.2 Display Unit Cooling Fan.
- Added "Appendix 2.13.1 Troubleshooting for NC".
- Corrected Alarms/Parameters to support the system software H0 vresion.
- Mistakes were corrected.
Revision details