12.1.4 Fuse
12.1.4.1 Control Unit Protection Fuse
Disconnection of the protection fuse will be caused by misconnections such as a reverse connection of 24VDC power
supply connector between +24V terminal and the ground.
Hold the upper part of the protection fuse and pull it when replacing it.
12.1.4.2 Operation Panel I/O Unit Protection Fuse
Disconnection of the protection fuse will be caused by misconnections of digital inputs/outputs.
Hold the upper part of the protection fuse and pull it when replacing it.
Protection fuse
Replacements
Protection fuse
Protection fuse
Replacements
Protection fuse
M700VS Series Setup Manual
Protection fuse
Part type
LM40
Part type
LM40
12.1 Durable Parts
129