Mitsubishi Electric M700VS Series Setup Manual page 429

MITSUBISHI CNC
Appendix 1 Explanation of Parameters
【#7938】 CERRT2V Vertical axis rotation center error compensation amount
Set the error compensation amount in the vertical axis direction of the tool rotating type tool-side
rotary axis rotation center.
---Setting range---
-99999.999 to 99999.999 (mm)
(Follow as "#1006 mcmpunit Machine error compensation unit".)
【#7940(PR)】 SLCT_W1 Rotary axis selection
Select in which axis direction to rotate the table rotating type base-side rotary axis.
If the tool axis is inclined, use the second digit to set the axis direction in which the tool axis is
inclined.
0: Invalid
1: I axis rotation
2: J axis rotation
3: K axis rotation
(Note) 0 to 99 can be set from the screen, but if an invalid value is set, the operation error "M01 0127
---Setting range---
0 to 3
12, 13, 21, 23, 31, 32
【#7941(PR)】 TIANGW1 Inclination angle
Set the inclination angle if the table-rotation type base-side rotary axis is inclined. Set the angle
regarding CCW direction of the inclined plane as plus direction.
---Setting range---
-359.999 to 359.999 (°)
(Follow as "#1003 iunit Input setup unit".)
【#7942(PR)】 ROTAXW1 Rotary axis name
Set the name of the table rotating type base-side rotary axis.
Set "0" when the axis has the mechanical axis specifications. (The setting is, however, invalid in the
tool center point control.)
---Setting range---
0, A, B, C, U, V, W, X, Y, Z
【#7943】 DIR_W1 Rotation direction
Set the rotation direction for the table rotating type base-side rotary axis.
0: CW
1: CCW
【#7944】 COFSW1H Horizontal axis rotation center offset
When all axes are at the machine basic point, set the distance in the horizontal axis direction from
the machine basic point to the rotation center of the base-side rotary axis.
---Setting range---
-99999.999 to 99999.999 (mm)
【#7945】 COFSW1V Vertical axis rotation center offset
When all axes are at the machine basic point, set the distance in the vertical axis direction from the
machine basic point to the rotation center of the base-side rotary axis.
---Setting range---
-99999.999 to 99999.999 (mm)
【#7946】 COFSW1T Height axis rotation center offset
When all axes are at the machine basic point, set the distance in the height axis direction from the
machine basic point to the rotation center of the base-side rotary axis.
---Setting range---
-99999.999 to 99999.999 (mm)
412
Rot axis parameter error" will occur when the power supply is turned ON.