Mitsubishi Electric M700VS Series Setup Manual page 202

【#9007】 MACRO PRINT PORT
Select the output port used for the user macro DPRINT command.
1: ch1
2: ch2
9: Memory card
【#9008】 MACRO PRINT DEV.
Select the device No. used for the DPRINT command. (The device Nos. correspond to the input/
output device parameters.)
---Setting range---
0 to 4
【#9009】 PLC IN/OUT PORT
Select the port for inputting/outputting various data with PLC.
1: ch1
2: ch2
【#9010】 PLC IN/OUT DEV.
Select the device No. used for the PLC input/output. (The device Nos. correspond to the input/output
device parameters.)
---Setting range---
0 to 4
【#9011】 REMOTE PRG IN PORT
Select the port for inputting remote programs.
1: ch1
2: ch2
【#9012】 REMOTE PRG IN DEV.
Select the device No. used to input remote programs. The device Nos. correspond to the input/
output device parameters.
---Setting range---
0 to 4
【#9013】 EXT UNIT PORT
Select the port for communication with an external unit.
1: ch1
2: ch2
【#9014】 EXT UNIT DEV.
Select the unit No. used for communication with an external unit(The unit Nos. correspond to the
input/output device parameters.)
---Setting range---
0 to 4
【#9017】 HANDY TERMINAL PORT
Select the port for communication with a handy terminal.
1: ch1
2: ch2
【#9018】 HANDY TERMINAL DEV.
Select the device No. used for communication with a handy terminal. (The device Nos. correspond to
the input/output device parameters.)
---Setting range---
0 to 4
M700VS Series Setup Manual
Appendix 1.1 User Parameters
185