Mitsubishi Electric M700VS Series Setup Manual page 142

[Precautions for handling battery]
(1) Always replace the battery with the same type.
(2) Do not disassemble the battery.
(3) Do not place the battery in flames or water.
(4) Do not pressurize and deform the battery.
(5) This is a primary battery so do not charge it.
(6) Dispose the spent battery as industrial waste in accordance with the local law.
If the battery low warning is issued, save the machining programs, tool data and parameters
in an input/output device, and then replace the battery. When the battery alarm is issued, the
WARNING
machining programs, tool data and parameters may have been destroyed. Replace the battery
and then reload the data.
1. Do not short-circuit, charge, overheat, incinerate or disassemble the battery.
CAUTION
2. Dispose the spent battery according to the local laws.
Battery cover
BAT connector
M700VS Series Setup Manual
Battery holder
Battery
12.1 Durable Parts
125