Ethernet Communication Specifications - Mitsubishi Electric CC-Link IE TSN User Manual

2.3

Ethernet Communication Specifications

The following table shows the Ethernet communication specifications for the NZ2GN-GFB.
CC-Link IE TSN
Item
Data transmission speed
Communication mode
Interface
Maximum frame size
Maximum segment length
Number of cascade connections
IP version
*1 The data transmission speed can be switched by using the communication speed setting function.
*2 For the maximum segment length (length between switching hubs), check with the manufacturer of the switching hub to be used.
CC-Link IE Field Network
Item
Data transmission speed
Communication mode
Interface
Maximum segment length
Number of cascade connections
1000BASE-T
100BASE-TX
1000BASE-T
100BASE-TX
1000BASE-T
Description
*1
1Gbps or 100Mbps
Full-duplex
RJ45 connector (AUTO MDI/MDI-X)
1518 bytes
*2
100m
Check with the manufacturer of the switching hub to be used.
IPv4
Description
1Gbps
Full-duplex
RJ45 connector (AUTO MDI/MDI-X)
100m (complies with ANSI/TIA/EIA-568-B (Category 5e))
Maximum 20 modules
2.3 Ethernet Communication Specifications
2 SPECIFICATIONS
17
2