Understanding Error Messages; Resolving Battery Pack And Charger Problems; Figure 15-5 Example Of The Status Screen - Olympus 38DL PLUS User Manual

To view the instrument status
1. Press [2nd F], [SETUP MENU] (SP MENU).
2. In the menu, select STATUS (see Figure 15-5 on page 271).
3. Press [MEAS] to return to the measurement screen.

15.8 Understanding Error Messages

When operating the gage, certain error messages may appear. Usually these messages
indicate a problem with the operating procedure, but some might indicate a physical
problem with the gage itself. If you do not understand an error message, contact
Olympus for assistance.

15.9 Resolving Battery Pack and Charger Problems

The power indicator (in the upper-right corner of the display) shows bars that indicate
the percentage of remaining battery charge level. When the charge level becomes low,
the gage automatically turns off. If the gage turns off immediately after you turn it on
or if you cannot turn it on, the battery pack is probably depleted.
Figure 15‑5 Example of the STATUS screen
Maintaining and Troubleshooting the 38DL PLUS
DMTA-10004-01EN, Rev. D, November 2016
271