Selecting The Measurement Units; Setting The Clock; Figure 4-1 Selecting The User Interface Language - Olympus 38DL PLUS User Manual

DMTA-10004-01EN, Rev. D, November 2016
4. Press [MEAS] to return to the measurement screen.
5. Turn off the 38DL PLUS, and then turn it back on to activate the language change.
4.2

Selecting the Measurement Units

You can set the 38DL PLUS to show thickness measurements in inches or millimeters.
To set the measurement units
1. Press [SETUP MENU].
2. In the menu, select MEAS.
3. In the MEAS screen, set UNIT TYPE to INCH or MILLIMETER.
4. Press [MEAS] to return to the measurement screen.
4.3

Setting the Clock

The 38DL PLUS has a built-in date and time clock. You can set the date and the time
and select their format. The 38DL PLUS saves all measurements value with their
acquisition date.
50 Chapter 4
Figure 4‑1 Selecting the user interface language